Emtek Rope 9-5/8" Brass Door Handle-Plate Set

Fits doors 1-1/4" to 2" thick. For thicker doors up to 3", please specify during checkout.

Hollow-core doors need special screws to mount hardware. If you have hollow-core doors, please specify during checkout.

Product Contents:

This complete door handle-plate set includes everything you need for one door:

• 2 handle-plates with selected handle attached (1 for each side of the door)
• 1 latch
• 1 strikeplate
• 1 faceplate
• 1 screw pack (includes mounting screws for rosette, strikeplate, faceplate)
• 1 mounting tool
• 1 privacy pin (with privacy sets only)
• Dummy mounting plates (with dummy sets only)

Emtek Rope Door Handle-Plate Product Features:

The Rope style was developed in England during the early 1800s and is associated with Georgian architecture. Rope designs were introduced into North America around 1910.

Emtek's brass door plates are forged (not cast or stamped) from solid brass to yield thick and heavy products for a truly solid look and feel.

Emtek brass door handles and plates are hand-buffed for maximum polish.

Emtek's glass door knobs are lead crystal. Shanks for crystal door knobs are solid brass.

Crystal antique door knobs are hand ground and polished with the same methods used to polish gemstones. These crystal door knobs are silver mirrored on the back side creating a highly reflective interior surface - a design detail that is true to the heritage of these antique door knobs.

French Antique, Pewter, and Oil Rubbed Bronze finishes are hand relieved to give each part individual character.

Emtek's Oil Rubbed Bronze finish is underlain with copper. Normal use will produce natural relief of the oxidized finish and reveal highlights on raised portions of the door handle design.

Emtek's latch nose-bolts, strikeplates, and faceplates are solid brass.

Emtek lever door handles have a fixed stop at the top of their stroke so that it only rotates downward, not up-and-down like most products you find at large home improvement centers.

Emtek door knobs and lever door handles are supported by springs behind the rosette or backplate that will actively return the door handles back to their original "rest" position to prevent sag.

Latches are heavy-duty diecast construction with strong internal springs and solid brass nose bolts.

A plastic bushing located in the joint between handle and rosette ensures a friction free wear surface - preventing metal from bearing on metal and provides smooth long-lasting operation.

Door handles are connected to the rosettes and backplates with a permanent clip.

Spindles are spring-loaded "half-spindles" pre-installed into the base of each door handle.

Each Emtek door handle has a set screw which, when tightened, eliminates wobbling of the door handle.

The threaded tubes inside an Emtek lock are machined brass.

Emtek Products, Inc. warrants all items to be free of finish/mechanical defects for 5 years from the purchase date given the following conditions are upheld:

1. The item has not been modified, abused, misused, or improperly installed, maintained, and/or repaired.
2. The item does not have an "aging" finish applied to it. Meaning, there is no warranty for items with Oil Rubbed Bronze, French Antique, Rust, Deep Burgundy, Medium Bronze, Flat Black Patina and Silver Patina finishes.